Tools for firmware updating and product code switching !!!

View previous topic View next topic Go down

Tools for firmware updating and product code switching !!!

Post  utsav on Sun Feb 21, 2010 6:36 am

Be careful these tools can brick your phone !!!!! Use them at your own risk


Nokia Software Updater (WinAll)
http://europe.nokia.com/A4579163
Code:
[size=9]Use the Nokia Software Updater application to help you update your Nokia device software.
Nokia Software Updater is compatible with most Nokia devices.
In addition, it is recommended to use the lastest version of the Nokia PC Suite software.

Allows you to download and install the latest Nokia device software.
Only needs to be downloaded once to your PC.[/size]


Nokia PC Suite Cleaner (WinAll)
http://europe.nokia.com/A41198596
Code:
[size=9]Nokia PC Suite Cleaner helps you remove any unnecessary Nokia PC Suite-related files
and registry data left on your PC after uninstalling Nokia PC Suite.

Important: Before using Nokia PC Suite Cleaner, make a backup copy of all your personal
content that is stored in the same folder as Nokia PC Suite.

If you have personal files stored in the folder where Nokia PC Suite is installed,
Nokia PC Suite Cleaner may remove these in addition to Nokia PC Suite-related data.
Nokia PC Suite Cleaner moves the personal files into recycle bin.

With Nokia PC Suite Cleaner, you can:

Remove old or unnecessary Nokia PC Suite-related files from your PC to make way for a new installation
Clean both Nokia PC Suite files and registry data
Leave other content on your PC intact[/size]


Nemesis Service Suit 1.0.38.14 (XP, No support for 5800)
http://www.b-phreaks.co.uk/files/NSS/NSS103814.zip
Code:
[size=9]Nemesis Survice Suite is our latest Nokia servicing solution. It supports all our current hardware devices
- Nemesis Multiflasher Box, F1 device and Prodigy LPT device. It can also interface with Diamond for secure execution
of additional applications. The most usefull function is probably the VUD mode (Virtual USB Device) where it can directly
comunicate with any BB5 phone via DKU-2 USB cable. We are still providing free download of the latest Beta versions of NSS[/size]


Phoenix Service Software 2008.44.5.36625 V.2 (XP)
rapidshare.com Phoenix_2008_44_5_v2.exe
Code:
[size=9]This release contains improved installer, changes:

- installs over old Phoenix, even if it can’t be properly uninstalled,
- removes flsdevcp.exe and tray.exe from autostart and memory,
- removes DK2 Network Server menu form Menu Start,
- no longer installs fls4.exe,
- new user interface, just because I wanted it to look better[/size]

Phoenix Service Software 2009.4.12.37934 V.2 (XP)
rapidshare.com Phoenix_2009_4_12_v2.exe
Code:
[size=9]This Phoenix Service Software installation package includes following SW components:

- MSXML 6.0 Parser
- VC++ redistributable
- Phoenix Service Software 2009.4.12.37934
- DK2 Dongle Driver v 7.14.0.25
- Nokia Connectivity Cable USB Driver v 7.1.8.0 (for Win2000 6.85.15.0)
- Flash Update Package 09_12_05_14
- FLS-x Dongle Driver v 2.09.26
- FPS-11 version 5.10.0

Flash Update Package is 09_12_05_14 - you can flash N96 without problems. As always, only USB cable needed, enjoy![/size]


Phoenix Service Software 2009.12.7.38366 (WinAll)
rapidshare.com Phoenix_2009.12.7.38366.exe
Code:
[size=9]Phoenix Service Software 2009.12.7.38366
 
Simply download and enjoy. Check release information below.

I have no idea if it works on Windows 7 on Virtual XP machine - but it surely doesn't work in native Windows 7 environment. Let me know if it works on virtual XP.

MULTI PROTOCOL PHOENIX SERVICE SOFTWARE 2009.12.7.38366
Published 08/05/2009 Size 131.4 MB
APAC - Service Software & Driver -> Phoenix & Bulletin
File type -> . Phoenix Multi Protocol & Bul

1. CHANGE HISTORY
Version 1 06.05.2009 Initial version
2. INTRODUCTION
New version of Phoenix service software is available. This multi-protocol service software supports Nokia
CDMA, GSM, TDMA, and WCDMA products.

Main component versions in the release:
• DK2 Driver Version 07.14.0.25
• Nokia Connectivity Cable USB Driver Version 7.1.16.0 (For Win2000 driver version 6.85.15.0)
• Flash Update Package 009.018.010
• FLS-x Drivers Version 2.09.26
Version 1 06.05.2009 Initial version
• FPS-11Version 5.10.0


3. CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2008.04.11.37849
New products supported:
• RM-578, RM-579, RM-508, RM-547, RM-566, RX-51, RM-565, RM-546, RM-529, RM-530, RM-
491, RM-564, RM-562, RM-563

New features
• New rf_losses.ini ver.40 for autotune function

Error Corrections & changes
• Improvements to N96 USB Flasing
• Flash Update Package 09.18.10.8 with improve,ments to random “finalization failed” – problems for
models with OMAP2420.
• Corrections for Network Prommer Maintenance
• Improvements for Tucson Product Code Change and BB5 Certificate Restoring with “Flash Phone”
– option selected.
• Improvements for connection manager when used with FLS-5

4. KNOWN ERRORS & LIMITATIONS
• Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data
Package 2 concept.
• Flashing with FLS-5, SS-46 and product specific adapter is not reliable for all BB 5.0 products,
new driver release with corrections will be released soon.
• Flash Update Package File installation path may be wrong. If you experience problems when
updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the
files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not,
Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix
“Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other
prommers except the FPS-8.
• Multi Flash has limited capabilities, launch Multiflash UI first and then connect phones one by one,
do not attempt to service more than 5 phones at the time


5. INSTALLATION
If you have Phoenix External 2007.4.6.170 or older you must uninstall it before installing this release.

1. Download Phoenix_Service_Software_2009_12_7_38366.exe application file to your computer
(e.g. C:\TEMP).
2. Close all other programs.
3. Run Phoenix_Service_Software_2009_12_7_38366.exe and follow instructions on the screen to
install Phoenix Service Software
4. Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the screen
5. If you are prompted to update any existing driver or file versions, select “yes”.
6. Depending on the operating system, the PC may require rebooting.
7. Allow Windows to register the Phoenix components.
8. Open Phoenix and update your prommer with the latest software included in this installation
package.
9. Use the latest available product specific data packages or flash bundles with new multi-protocol
Phoenix.
Supported operating systems and user rights
• Windows 2000 Service Pack 4 or higher
• Windows XP Service Pack 1 or higher
• When installing Phoenix into Win 2000 or XP you must have local admin rights.
• When using in Win 2000 or XP, user must have power user rights.

For HW & Tool requirements please refer to Service Repair Processes TB-209
For information on product specific data packages, tools and instructions please refer to service manuals and technical bulletins.
If you want to use FPS-11, please download separate FPS-11 driver package
If you are installing this version of Phoenix on a new Imaged PC, and you are using an FLS-4S or FLS-5
during the install, then install the FLS-X drivers first.[/size]



Phoenix (Internal) Service Software 2009.12.7.38366 v.2 - improved setup (WinAll)
rapidshare.com Phoenix_2009.12_v2.exe
Code:
[size=9]I decided to drop the old installer and create something more flexible. Changelog:

- works with Windows 7/Vista (32 bit) - as of Win7 RC1,
- you can install Phoenix Internal during setup,
- you can uninstall Phoenix via Control Panel or Start Menu icon,
- setup loads much faster (due to reduced compression ratio),
- reduced (even more) risk of installation problems,

I am pretty sure I have covered all the goals I was facing when I started to release Phoenix. I will concentrate on updating Phoenix to latest versions.[/size]




Nokia Care Suite 1.3.6 2009.13.0 (XP)
rapidshare.com Nokia_Care_Suite_Store_2009_13_0.msi.html

rapidshare.com Nokia_Care_Suite_Store_2009_13_0.msi

http://uploaded.to/file/wzeuwh

Nokia Care Suite Guide For Newbies
easy-share.com Nokia_Care_Suite_guide.rar
Code:
[size=9]Please note that this release should be considered a beta release for GSM/WCDMA models
 
This release should only be posted in NOL for all CDMA markets and India.
 
Service SW installation packages and Technical Bulletins are available from NOL. 

CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 1.3.5 2008.42.5
•  Multi flashing tools have been enabled for CDMA (GSM also, but it doesn′t work)
•  Connection can be added without restarting Care Suite 
•  Improvements enabling Fuse application to close properly
•  Finish - button available after recovery is finished   
•  Improvements enabling PST application to close properly
•  Plugins are displayed correctly
•  Improvements to product log writing
•  Nokia Care Suite icon is visible on the desktop
•  Error shown when a product without supported is connected 
•  Improvements to “Number of storing days” field for Product Log 
•  Error occures when product log location is set to non existing  location
•  Self test reporting only activated for RH-111 

KNOWN ERRORS & LIMITATIONS
•  Error message appears Setiings Editor when user wants to open settings file   
•  CDMA multi provisioning can not program PRL, ERI, Contacts and MDN information 
•  CDMA Settings editor not compatible with N8208 / RM-384 and N2608 / RM-376
•  Fatal Error occurs when closing Product Support Tool in Vista 
•  Message 'fatal error during installation'  may be shown
•  Error during uninstallation may be shown
•  Fuse Problems with N1202 / RH-111 detecting 
•  Fuse Confirmation dialog during changing connection's name does not work properly
•  Multi Refurbish/Automatc start in Multi Refurbish process doesn't work properly when user
connects new product 
•  UI elements and WinVista do not work properly
•  Scroll bar in Fuse doesn't change its position when user drag and drop it 
•  Internal Module Error during N96 / RM-247 refurbish 
•  Downloading software update package fails during multi refurbish
•  Fuse: An error occurs while attempting to close the dialog[/size]


JAF 1.98.62 (XP,Vista 32-Bit)
rapidshare.com JAF.1.98.62.rar
JAF PKEY Emulator v4.0
megaupload.com ANG6RHPQ
JAF PKEY Emulator v5.0
megaupload.com QYR4571O
Code:
[size=9]Works both with USB cable and UFS boxes. Allows to downgrade (and possibly dead flash over usb) all bb5 phones.
Also reads security code and creates certificate backup.[/size]


Note: Non of these Tools have 64-Bit support.

Firmware for your phone use Navifirm firmware downloader
http://nokia-magikk.boards-directory.com/all-about-flashing-and-firmware-f15/navifirm-user-guide-t2.htm


avatar
utsav
Admin

Posts : 7
Join date : 2010-02-20
Age : 32
Location : Delhi

View user profile http://nokia-magikk.boards-directory.com

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum